• <th id="gcmjs"><pre id="gcmjs"><sup id="gcmjs"></sup></pre></th>
      <tbody id="gcmjs"></tbody>

    1. <button id="gcmjs"></button>
      <tbody id="gcmjs"></tbody>
        <tbody id="gcmjs"><pre id="gcmjs"></pre></tbody>
        <dd id="gcmjs"></dd>

        歡迎來到深圳市旭崇自動化設備有限公司網站!專業的邦定機廠家,為您免費提供邦定機、貼合機、ACF貼附機等相關信息發布和最新資訊,敬請關注!

        旭崇 加熱固化爐 XCH87-B1

        文章出處:http://www.kickzpro.com/news686878.html發布時間:2019-07-31 00:00:00

        旭崇 加熱固化爐  XCH87-B1

         Heat Solidifying M/C  XCH87-B1  

         

        設備用途 Application

        1 本產品適用于各種不同產品加熱工藝;設備配備加熱爐、溫控系統、FFU和電控系統等部分構成

        2 廣泛應用于:各種水膠固化,產品加熱,生產工藝。

         

        1 The machine is used for heating process of various products and equipped with heater, temperature controlling system, FFU and electronic controlling system.

        2 Widely used in solidifying all kinds of LOCA or heating products during production process.

         

         

        產品細節 Details

        人機操作界面  Operating Interface

        溫度顯示  Temperature Indicator

        操作控制按鈕  Operating Button

        固化層機構  Group of Solidifying Layer

        空氣過濾機構  FFU

         

        產品介紹  Introduction

        1 人工將需加熱的產品一層一層放入加熱爐內;

        2 關好門,按下加熱按鈕;

        3 加熱溫度達到后開始計時,達到時間后轟鳴器報警,產品加熱OK;

        4 打開門,人工將產品取出;

        5 重復以上動作。

         

        1. Put product manually into the layers.

        2. Close the door, press heating button.

        3. The machine will start timing when heating temperature is reached, sounding device alarm after timing reached, heating OK.

        4. Open the door, remove the products.

        5. Repeat the above actions.

         

         

        產品參數  

        輸入電源:380V 50-60HZ

        Input Power: 380V 50-60HZ

        額定功率:20KW

        Rated Power: 20KW

        水平調節:千分尺調節

        Horizontal Adjustment: Micrometer

        托盤尺寸:500*400mm

        Dimension of Layer: 500*400mm

        安全防護:靜電防護+超溫保護+漏電保護

        Safety Protection: ESD protection + overheat protection + leakage protection

        加熱結構:發熱管恒溫加熱

        Heating Structure: Constant Temperature

        載臺:手動拉動托盤

        Platform: Layer

        程序控制:LG-PLC

        Controlling Program: LG-PLC

        外型尺寸:L1560mm*W1180mm*H1780mm(不含FFU

        Dimension: L1560mm*W1180mm*H1780mm (exclude FFU)

        設備重量:380KG

        Weight of Machine: 380KG

         

        功能特點  Features

        1 人機界面可通訊溫度控制器,直接修改溫度及加熱時間。

        2 溫度顯示可方便觀察每層溫度,每層溫度單獨可調。

        3 操作按鈕,此按鈕為帶燈加熱按鈕,產品加熱完成。會關閉按鈕燈,方便知道哪層加熱完成。

        4 固化層,每層采用單獨開關門,透明門,每層有單獨托盤取出。

        5 FFU空氣過濾器能有效過濾外界空氣帶來的灰塵,保證一個良好的生產環境。

         

        1 Heating temperature and time can be set and revised in operating interface.

        2 Temperature of each layer can be observed through temperature indicator and also can be set independently.

        3 When heating finished, the light in operating button will off, which is convenient to know which layer is complete heating.

        4 Group of solidifying layer adopted transparent door, it’s easy to take and observe.

        5 Dust can be filtered from outside effectively by FFU, which guarantees a good production environment.

         

         

        工藝流程  Process

        加熱固化    Solidifying

         

        輔料  Accessories

        無塵布  Dust-free Cloth

        酒精  Ethanol

        棉棒  Cotton Swabs

        此文關鍵詞:固化爐,

        推薦產品